FM 200 Fire Suppression System in Pakistan

FM 200 Fire Suppression System in Pakistan

FM 200 Fire Suppression Systems

FM 200 Fire Suppression System is a non-flammable gas used for fire suppression. It doesn’t damage electronic products, used correctly it’s safe for people to breathe in and can be used in an enclosed space, making it ideal for colocation data centers.

FM 200 Fire Suppression System is the commercial name given to it by its makers, DuPont. Its technical name is ‘heptafluoropropane’ and it is a colourless, odourless halocarbon.

FM200 extinguishes flames by removing the fire’s free radicals, disrupting an element of the fire tetrahedron by effectively preventing the chemical reaction that allows a fire to burn. When the FM200 agent comes into contact with heat (i.e., something on fire) a chemical reaction occurs locally to lower the temperature and extinguish the fire.

It then dissipates, leaving behind no residue, and doesn’t damage any electronic equipment, since it is totally non-conductive. This means all the servers in an affected data hall can continue operating as normal.

FM200 fire suppression
FM-200 Suppression Systems, FM200 Gas Flooding System, Gas Suppression System in Data Center Room

FM-200 Fire Suppression Systems

How Does FM-200 Fire Suppression System Work?

FM200 Fire Suppression System suppresses fire by disrupting the fire triangle. The fire triangle is made up of heat, oxygen, and a fuel source, and by removing one of these elements, the fire is extinguished. FM200 Fire Suppression System removes the heat or free radicals, which interferes with the fire triangle’s chemical reaction to extinguish the fire. Clean agent fire suppression systems, like ones using FM200 Fire Suppression System, can achieve fire extinguishing concentrations in 10 seconds or less.


FM 200 Fire Suppression System is a clean agent that is safe around people; therefore, FM-200™ fire suppression systems are safe to install in occupied spaces.

When an FM 200 fire suppression system activates to put out a fire, no residue is left behind, and it is safe for equipment, electronics, and machinery.

Compared to other clean agents like 3M™ Novec™ 1230 Fire Protection Fluid, FM-200™ is a slightly more cost-effective option.

Because of the small amount of FM-200™ required to suppress a fire, smaller or fewer cylinders are needed when compared to other agents like 3M Novec 1230 fluid.


When compared to other clean agents, FM-200™ has a slightly higher Global Warming Potential (GWP).

While the FM-200™ does not contain Halon gas, it still uses Hydrofluorocarbons (HFC) to suppress fires, which is not as eco-friendly as other clean agents.

Automatic Fire Suppression System Automatic fire suppression systems react to a rapid rise in heat, or fire situation, without any human intervention. These systems contain the same general components: Detection element, such as pneumatic tubing or a smoke detector.

A fire suppression system is an integral part of any fire protection infrastructure. ‘Fire suppression’ is a collective term for any engineering group of units designed to extinguish fires. This can be achieved by using extinguishing agents such as water, foam or chemical compounds.


Fm 200 Fire Suppression System Pdf

Our company Provides UL & FM Listed FM 200 fire suppression system. Please Click to Download , its simple standards broachers pdf file .Hygood by Johnson Controls

Fire Extinguishing System

Carbondioxide Fire Extinguishing System

Fire Suppression System in Pakistan
Fire Suppression System in Pakistan

CO2 Fire Extinguishing System

Adams Fire Tech CO2 system extinguishes fire by reducing the oxygen content of the protected space and or local flame front to a point where it will not support combustion.

Oxygen reduction below 16% by volume will extinguish most fires.

Thermo-Act Fire Extinguishing System

Fire Suppression System in Pakistan
Fire Suppression System in Pakistan

Thermo-Act Fire Extinguishing System

Adams Fire Tech Thermo-Act systems are the advanced technology of automatic fire suppression systems. The systems provide a self activating suppression system that suppresses fires in seconds.

They are simple design and installation with low maintenance, highly cost effective and reliable. The electricaal or pneumatic sources shall not be required to our Thermo-Act Systems. The systems can be used in teh presence of an increased risk of fire.

Adams Fire Tech Thermo-Act Systems utilize fire flexible tube for fire detection. Thus, the fire detection and extinguishing system is not required to detect and discharge.

Adams Fire Tech Thermo-Act Systems can be designed with commercial available agents including clean agent, wet chemical, foam, and dry powder. The system may be arranged as Direct System or Indirect System.

Kitchenhood Fire Extinguishing System

Kitchenhood Fire Extinguishing System

Fires have a greater chance of starting in your kitchen. The proper way is stop the flames from spreading.

Kitchen fires in restaurants and hotels are classified as F fire, so the best agent to be used is the wet chemical to extinguish the fire with faster, high efficiency and less damage.

Our wet chemical kitchen hood system is simple, fast response and active system to protect your lives and properties.

It is simple to install and having sensitive detection system to assure sensing fire from the cradle and injecting the wet chemical agent in a way to secure quick fire extinguishing.

Fike Clean Agent Fire Extinguishing System

Fire Suppression System in Pakistan
Fire Suppression System in Pakistan

Fike Clean Agent Fire Extinguishing System

HFC-227 ea provides superior fire protection in a wide range of applications from sensitive electrical equipment to industrial applications using flammable liquids. HFC-227 ea is ideal for applications where clean-up of other media presents a problem, where weight versus suppression potential is a factor, where an electrically non-conductive medium is needed and where people compatibility is an overriding factor.

When environmental impact is a consideration. HFC-227ea is particularly useful. It has zero ozone-depleting potential, low global warming potential and a short atmospheric lifetime. These characteristics make it suitable not only for new installations using Fike’s total flooding systems, but also for Halon 1301 replacement applications.

fm-200 system full form

FM-200 system as “FireMaster-200 system” and mention that it utilizes HFC-227ea as a clean agent for fire suppression. This concise statement includes relevant keywords for improved search engine visibility while also conveying the essential information about the system

fm-200 fire suppression system how it works

FM-200 fire suppression system uses HFC-227ea gas to extinguish fires by reducing the concentration of oxygen in the protected area. This concise statement includes relevant keywords and highlights the key working principle of the system for improved search engine visibility.

fm-200 cylinder gas pressure

FM-200 cylinder gas pressure typically ranges from 24 to 25 bar at 21°C.

FM 200 Fire Suppression System Price

FM 200 Fire Suppression-System  Minimum Price is 100k and maximum price is 1000k Depending on the project size

5 (28 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *