lockout_padlock_metal_tags_collarsLockout Padlock Metal I.D. Tags and Collars are available for their use on Locks and other lockout devices. Manual Indenter Marking Press is used for punching numbers.
Heavy duty zinc plated / SS chain with mounting brackets is available to hang the lockout gadgets / shackle of the padlock near to the pre designated locations. These products are generally sold in the pack of 6 or 12 no’s.
MODELPRODUCT DESCRIPTION
ES – METALTAGS LONGMETAL Padlock Tags – LONG – SET OF 6
ES – METALTAGS CIRCULARCIRCULAR METAL Padlock TAGS – SET OF 6
ES – LASER TAGSLASER TAGS for lockout padlocks / keys with rings
ES – MB + CMetallic Mounting Bracket and 9″ Chain.
lockout_padlock_circular_metal_tags
lokcout_padlock_stainless_steel_chainAny shape or design can be accommodated with ultra-fine detail achieved using our state of the art machines. The sheets are hard wearing, resistant to oils and temperature extremes. Charged extra : as per the quantities.

 

SAFETY LOCKOUT PADLOCK HANDY

safety_lockout_padlock_handyIdeal for employees who need to carry out multiple isolations. It helps in improving efficiency by keeping hands free. It holds up to 12 Safety Padlocks.
The Lockout Padlock Handy is designed to be worn on the belt or can be hung on the wall / in the special cabinets, when not in use.

MODELPRODUCT DESCRIPTION
ES-HandySafety Padlock HANDY
safety_lockout_padlock_handy_new

 

LOCKOUT PADLOCK EYE

These Lockout Padlock Eye help you to comply with OSHA standards, which require that equipment / electrical panels need to be modified to accept locks and lockout devices. Surface mounted padlock eyes help you to install the lockout gadgets or lockout padlocks easily on the electrical panels or other areas where the isolation points are hidden in the cabinets, with steel or clear doors – which are just provided with simple twister knobs or latches which can not be locked.

  • Made from solid stainless steel constant thickness sheet.
  • Die cut to hold most of the internationally available padlocks.
  • They can be screwed / bolted or riveted to steel or wooden sections.
  • Each set contain – 10 nos. of padlock eyes.
  • Combo pack contain 2 nos. of each type – Total 12 nos.
MODELPRODUCT DESCRIPTION
ES-FPE-SFlat Padlock Eye – Small
ES-RPE-SRight Angled Padlock Eye – Small
ES-FPE-MFlat Padlock Eye – Medium
ES-RPE-MRight Angled Padlock Eye – Medium
ES-FPE-LFlat Padlock Eye – Large
ES-RPE-LRight Angled Padlock Eye – Large
ES-PE-ComboPadlock Eye – COMBO PACK
ES-FPE-JFlat Padlock Eye – Jumbo
ES-RPE-JRight Angled Padlock Eye – Jumbo
ES-BUFFERSMetallic Buffers for Padlock Eye
ES-RIVETSMetallic Rivets for installing Padlock Eye
ES-RMRiveting Machine
lockout_padlock_eye