ELECTRICAL PANEL LOCKOUTS

These LOTO units have been designed to lockout electrical panel buttons and switches with no inbuilt lockout provision / arrangement. Available in various different designs, they all work in a 2-stage operation. The base plate should be attached directly onto the electrical panel over the top of the relevant switch using the super strong adhesive Backing / Riveting / Bolting. When in place, the electrical plugs / switches / button can be isolated by placing the house unit over the top of base plate – hence preventing the access to the isolated switch. Then, they can be locked in place with a Lockout Padlock.

The circular units are designed to fit over most of the universal type push / mushroom panel buttons and the square units are designed for the switches with levers. For the switches with extended handles – we have the special patented lockout solutions that freeze the movement of these switches to a still position where they need to be locked at a specific angle. We also have in the range – the Ellipse lockouts for the twin switches and the special big push button switch lockouts beside the special series of same type of lockouts….information on which can be made available on request. We are always eager to extend our range of products, so we make / develop new devices and serve our dedicated customers with the best of the product lines. If you do not find the product of your use in our catalogue – please inform us and let us know the part – for which the lockout is required….. We will be glad to develop the same for you at our cost. The best part is that – this complete range of products can be cut from any side / direction to suit the installation on different panels with varied wiring / attachments to the switches / conduits, levers protruding out or of different shapes, etc.

	Manufactured from sturdy special grade transparent material, each unit has been developed to completely enclose electrical plugs to prevent a machine from being energized. The plug completely sits inside the unit ….. If more than one unit on a single panel needs to be locked out – we recommend the use of our De Electric Squeezer lockout with the yellow cable being fed through the access holes of these electrical lockouts and locked at one location by the multiple users.
	Dimensions Description Inside size L x B (A) Plant size L x B (B) Cover size L x B X H (C) Number of padlock holes ES – SQ S – E (Small Box) 46.5 x 50 mm 72 x 72 mm 57 x 57 x 57 mm 2 ES – EPL – SQB (Big Box) 66 x 74 mm 95 x 95 mm 80 x 80 x 57 mm 2 ES – SQ B – 45E (45 degree) 66 x 74 mm 95 x 95 mm 80 x 80 x 57 mm 2 ES – SQ B – 90E (90 degree) 66 x 74 mm 95 x 95 mm 80 x 80 x 57 mm 2 ES – SQ B – L (Large Box) 92 x 100 mm 129 x 129 mm 106 x 106 x 106 mm 2
	* Patented Product FOR MORE TECHNICAL / INSTALLATION INFORMATION ON THIS PATENTED RANGE OF PRODUCTS – CONTACT OUR TECHNICAL DEPARTMENT OR WRITE A MAIL TO : LOTO@VSNL.NET OR USE THE MENTIONED HELP LINE NUMBER.

Safe & effective method for locking out close twin round switches as seen on electrical panels. They are Virtually Transparent. Padlock can be placed for locking / isolating the switches. This lockout can be easily installed by just removing the back strip from the double sided super strong backings.

MODEL PRODUCT DESCRIPTION ES – CIR – 45 Electrical Panel Lockout – Round 45 ES – CIR – 55 Electrical Panel Lockout – Round 55 ES – SQ S – E Electrical Panel Lockout – Square Box – Small – Electrical ES – EPL – SQ B Electrical Panel Lockout – Square Box – Big ES – SQ B – 45E Electrical Panel Lockout – Square Box – Big 45° ES – SQ B – 90E Electrical Panel Lockout – Square Box – Big 90° ES – SQ B – L Electrical Panel Lockout – Square Box – Large ES – ELLIPSE Electrical Panel Lockout – Ellipse ES – Slider ESL Slider Electrical Switch Lockout

ELECTRICAL PANEL HANDLE LOCKOUT

Patented design of EPHL freezes the movement of the bigger handles / levers installed on the electrical panels. Two Yellow bases and flexible powder coated stainless steel strip of 25 mm x 300 mm with 20 holes makes it impossible for the handles to move from their position once locked with the help of two yellow clamps and a lockout padlock. Best Suitable / Recommended for handles, all kinds of levers having no arrangement for lockout. MODEL PRODUCT DESCRIPTION ES – EPHL Electrical Panel Handle Lockout

MUSHROOM : NORMAL PUSH BUTTON LOCKOUT

Safe & effective method of locking out emergency stop type Mushroom buttons of normal sizes. Made from special grade whitish Polyvinylchloride substance. Supplied with a red beak padlock installer. Lockout labels are provided to specify the name of installer. MODEL PRODUCT DESCRIPTION ES – MUSHROOM Normal push button Lockout for electrical panels

COCOON : OVERSIZE PUSH BUTTON LOCKOUT

Most appreciated lockout solution for the Oversize Electrical Push Buttons on the electrical panels or on control stations. Also finds its application on the Special crane / heavy machinery. This lockout device can be easily installed in seconds – by just placing it on the Push buttons thus concealing them in a cocoon – hence protecting them from being accidently energized. The two parts are plugged and then locked out with the help of our lockout padlock. Inner size of 70 mm x 85 mm height with 30 mm dia hole in center. MODEL PRODUCT DESCRIPTION ES –Cocoon Oversize Push Button Lockout