DESCRIPTION
a.Made from ABS material.
b.Double open and quadrilateral lockout design, suitable for all kinds of electrical  and pneumatic plug (max diameter 89mm, max length 127mm ) and air hose external screw thread adaptor.
c.The hole in the lockout can lock cable and the bent down pneumatic external screw thread accessory.
d.Accommodates 4 pieces padlocks with shackle diameter less than 7mm to lock it.
ORDER INFO
Product CodeProduct Description
XQ-01Fitted with 6.4mm, 9.5mm & 12.7mm screwed joint
XQ-11For 8-45mm valves
XQ-21For valve stem hole of 32mm
XQ-21TFor valve stem hole of 32mm Transparent
XQ-31For neck rings up to 89mm in diameter
CONTACT

    Your Name (required)

    Your Email (required)

    Subject

    Your Message

    Pneumatic Lockouts – Isolate pneumatic energy without the expense and inconvenience of installing in-line lockout valves. These quick disconnect lockouts are applied to the male fittings, isolating equipment from all compressed air sources.

    PNEUMATIC LOCKOUTS – BOX TYPE

    • Pneumatic Lockout Box Type – Accommodates male air hose connectors as well as their electrical plugs (110 V, 220 V, 550 V Plugs).
    • Made of Polystyrene material, 4 padlocks can be applied.
    • Ensures that the male air hose connectors & the plug can’t be used until the lock is removed. AVAILABLE IN 2 SIZES.
    MODEL PRODUCT DESCRIPTION
    ES – SPLO Small Pneumatic Lockout
    ES – LPLO Large Pneumatic Lockout

    industrial_pneumatic_lockout_box

    		 large_pneumatic_lockout_box

     

    PNEUMATIC LOCKOUTS – STRAIGHT

    This unique design pneumatic lockout – straight fits virtually all pneumatic fittings used in manufacturing facilities. This is applied to the fitting to prevent it from being reconnected to the pressurized air source.

    • Made from the Stainless Steel solid sheets – to make them strong, durable and resistant to corrosion.
    • Simple to use, just place over male fittings between the two parts and put your lockout padlock.
    MODEL PRODUCT DESCRIPTION
    ES – PL 9H Pneumatic Lockout – Straight with 9 Holes

    pneumatic_lockout_straight_fittings

    		 pneumatic_lockout_straight
    Rate this page