Viking Valves & Systems
Viking Valves & Systems are designed as a fire safety shut-off valve for use on burning equipment. The valve is installed in the oil supply pipeline outside the building with the sensor mounted firmly inside the appliance above the burner.
Viking Valves & Systems
Wet Pipe Systems
Model E-1 / F-1 EasyRiser® Swing Check Valve & Trim
The Viking Easy Riser® Swing Check Valve is a general purpose rubber-faced check valve approved for use in fire service systems. The valve is for use in wet system risers, preaction system risers and wherever a check valve with a drain connection and gauge connections can be utilized. When used with a flow switch on wet pipe systems not requiring a mechanical alarm, the Easy Riser® Swing Check Valve may replace an alarm check valve.
Technical Data Sheets
Technical Data SheetsModel J-1 Alarm Check Valve
The Viking Model J-1 Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve is designed to initiate an alarm during a sustained flow of water (such as the flow required by an open sprinkler) by operating an optional water motor alarm and/or alarm pressure switch.
Technical Data Sheets
Alarm Check Valve Vertical Trim (Model J-1)
Alarm Check Valve Horizontal Trim (Model J-1)
Dry Pipe Systems
Model F-1 Dry Valve
The Viking Model F-1 Dry Pipe Valve is a latching differential valve used to separate the water supply from the dry pipe sprinkler system. The valve combines a positive latching clapper and air plate assembly, with a differential air to water seat design. The latching clapper and air plate assembly provides a positive mechanical seal for the air pressure in the dry pipe system.
———————————————————————–
Model F-2 Dry Valve
The Viking Model F-2 Dry Pipe Valve is a latching differential valve used to separate the water supply from the dry pipe sprinkler system. The valve combines a positive latching clapper and air plate assembly, with a differential air to water seat design. The latching clapper and air plate assembly provides a positive mechanical seal for the air pressure in the dry pipe system.
———————————————————————–
Dry Valve Trim (Model F)
