fire-alarms

Fire Alarm Systems

 

fire-alarmsAdams Fire Tech has a complete range of advanced conventional and addressable fire alarm systems, detectors, signaling devices, accessories and service tools for any new or retrofit application. Select a product category from the list below..

 

Conventional Fire Alarms

imagem

1 & 2 ZONE

The I one & two zones conventional control panel, offers a creatively designed and aesthetically pleasing solution for smaller cost-conscious projects demanding simplicity of operation.The programmable features included in this panel are: programmable time delay and Day/Night mode.Operation is extremely intuitive , offering simple control and one-button disablement facilities, as well as the one man test mode which provides simple and efficient testing of the system.

 

 

 

 

8ZONE

2,4 & 8 ZONE

The range of conventional control panels features three models with 2, 4 and 8 Zones of detection. Housed in a stylish modern ABS housing, It is the ideal control panel for smaller installations. (detector bases must be fitted with Diode)
Programmable Zone coincidence and alarm delay timer (0-10 min) are standard features to help reduce false alarms.The one man test facility enables simple and rapid testing of the system at commissioning and during maintenance operations.

Addressable Fire Alarms

addressableIt will provide remote control, system status display and monitoring functions for any of Analogue Addressable Fire Detection Panels.

All Fire, Fault, Test and Disabled conditions are displayed. User is able to control all functions at access Level’s 1, 2 (authorized user level) and 3 (installer/ programming level). It’s reduced dimensions make it ideal for installation in reception areas or security booths.

A maximum of 4 panels can be connected to a single Addressable Panel if powered directly from the Control Panel’s Auxiliary Supply Output.

It includes as standard an RS485 interface. This unit is also compatible with all standard data loop interfaces allowing the panel to be interfaced to both JUNIOR and JUNO-NET addressable panels.

 

 

JUNIOR REP

sc_canvasThe JUNIOR REP will provide remote control, system status display and monitoring functions for any Analogue Addressable Fire Detection Panels. All Fire, Fault, Test and Disabled conditions are displayed. User is able to control all functions at access Level’s 1, 2 (authorized user level) and 3 (installer/programming level). Compliant with EN54-2. Display and Control Functions are replicated and shown in the same manner as on any of GFE’s Analogue Addressable Fire Detection Panel. Access to Levels 2 and 3 is via a code using the same as programmed for the associated panel.

It includes as standard an RS485 interface. This unit is also compatible with all standard data loop interfaces allowing the JUNIOR REP panel to be interfaced to both JUNIOR and JUNO-NET addressable panels using 3 different interfacing technologies: